Bosch 800 Series Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik Bosch 800 Series. Bosch 800 Series 48 stron. Built-in wall ovens
Również dla Bosch 800 Series: Instrukcja instalacji (24 strony), Instrukcja instalacji (40 strony), Instrukcja obsługi i konserwacji (12 strony), Instrukcja instalacji (23 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (32 strony), Instrukcja obsługi (32 strony), Instrukcja instalacji (32 strony), Skrócona instrukcja obsługi i bezpieczeństwa (7 strony), Instrukcja obsługi i konserwacji (40 strony), Instrukcja instalacji (40 strony), Instrukcja instalacji (32 strony), Instrukcja instalacji (40 strony), Instrukcja obsługi i konserwacji (33 strony), Instrukcja obsługi i konserwacji (49 strony), Skrócona instrukcja obsługi (7 strony), Skrócona instrukcja obsługi i bezpieczeństwa (13 strony), Instrukcja instalacji (32 strony), Instrukcja serwisowa (36 strony), Instrukcja instalacji (29 strony), Instrukcja obsługi i konserwacji (24 strony), Instrukcja obsługi i konserwacji (40 strony), Instrukcja instalacji (28 strony)

Bosch 800 Series Instrukcja instalacji

Before You Begin

Tools and Parts Needed

Phillips head screwdriver
Slotted screwdriver 1/8" (3,5 mm)
Adjustable wrench
Tongue and groove pliers
Socket or flat wrench 3/8" (10 mm) or tongs
Socket or flat wrench 7/8" (22 mm) or tongs
Drill with 5/16" (8 mm) bit
Pencil
Tape measure
Teflon tape or pipe-joint compound
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts Included

30":
* Attached to the appliance.
8
B e f o r e Y o u B e g i n
36":
* Attached to the appliance.

Removing Packaging

See the diagram on the packaging.
If straps are present, cut the straps.
Cut plastic down back of unit making sure not to cut
the unit.
Remove plastic film.
Lift the cardboard carton from the top of the range and
dispose of.
Remove the corner posts, making sure that any other
packing materials running between the corner posts
are also removed.
Remove all internal packaging and tape.
The rear vent trim is nested in the styrofoam
packaging for shipping purposes. Do not throw away.