Galvin Engineering Safe-Cell 50150 Panduan Instalasi Produk - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi Produk untuk Produk Pipa Galvin Engineering Safe-Cell 50150. Galvin Engineering Safe-Cell 50150 4 halaman. Prison basin set
Halaman Cetak
1. Fit push button & basin outlet
Fit the push button and basin outlet into the bench.
Ensure the sealing o-ring is placed underneath the
push button and outlet body and the anti-rotation pin
locates properly.
Secure underneath with the supplied cup washer and
back nut.
3. Fit flexi hose
Connect water supply to isolation valve inlet.
Version 2, 30 August 2018, 3 of 4
2. Assemble valve body
Assemble the valve body to the push
button.
Ensure to apply thread tape for sealing.
Take care not to over-tighten.
4. Testing
Push the button and ensure that there is
flow from the outlet.
Inspect the tap and check for any leaks.
Adjust flow with isolation valve, so
required flow is achieved