Siemens SIPART PS2 Instruksi Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Instruksi Instalasi untuk Peralatan Industri Siemens SIPART PS2. Siemens SIPART PS2 11 halaman. Mounting bracket kit
Juga untuk Siemens SIPART PS2: Instruksi Instalasi (4 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Instruksi Instalasi (4 halaman), Panduan Pemasangan Perangkat Keras (30 halaman), Deskripsi Teknis (26 halaman), Petunjuk Pengoperasian yang Ringkas (35 halaman), Petunjuk Pemasangan Kit (9 halaman)

15900-795

Install Mounting Plate and PS2 Assembly onto Actuator

1. Install 5/16" lock washers onto 5/16-18x0.75 Hex head bolts

2. Since mounting plate is intended for several actuator models, be sure fasteners are inserted

through proper slots and/or holes. Proper slots/holes are shaded in table 3 below.

Actuator

Model

Number

M-00

M-11

M-33

M-22

3. Using the two 5/16" hex head bolts, secure mounting plate assembly onto the two actuator

threaded holes. Table 4 illustrates location of bolts within slot so feedback arm is perpendicular to

actuator/valve stem at 50% of travel.

IMPORTANT: Be sure feedback pin engages spring clip and arm slot while making this assembly.

Proper Bracket

Holes/Slots

Shaded Area

TABLE 3, Proper Mounting Holes/Slots

Actuator Model

Number

M-44-78

M-44-108

Proper Bracket

Holes/Slots

Shaded Area