Siemens SIPART PS2 Installation Instruction - Page 6

Browse online or download pdf Installation Instruction for Industrial Equipment Siemens SIPART PS2. Siemens SIPART PS2 11 pages. Mounting bracket kit
Also for Siemens SIPART PS2: Installation Instruction (4 pages), Operating Instructions Manual (28 pages), Installation Instruction (4 pages), Hardware Installation Manual (30 pages), Technical Description (26 pages), Compact Operating Instructions (35 pages), Kit Installation Instruction (9 pages)

Print Page

15900-795

Install Mounting Plate and PS2 Assembly onto Actuator

1. Install 5/16" lock washers onto 5/16-18x0.75 Hex head bolts

2. Since mounting plate is intended for several actuator models, be sure fasteners are inserted

through proper slots and/or holes. Proper slots/holes are shaded in table 3 below.

Actuator

Model

Number

M-00

M-11

M-33

M-22

3. Using the two 5/16" hex head bolts, secure mounting plate assembly onto the two actuator

threaded holes. Table 4 illustrates location of bolts within slot so feedback arm is perpendicular to

actuator/valve stem at 50% of travel.

IMPORTANT: Be sure feedback pin engages spring clip and arm slot while making this assembly.

Proper Bracket

Holes/Slots

Shaded Area

TABLE 3, Proper Mounting Holes/Slots

Actuator Model

Number

M-44-78

M-44-108

Proper Bracket

Holes/Slots

Shaded Area