Siemens SIPART PS2 Installatie-instructie - Pagina 6

Blader online of download pdf Installatie-instructie voor {categorie_naam} Siemens SIPART PS2. Siemens SIPART PS2 11 pagina's. Mounting bracket kit
Ook voor Siemens SIPART PS2: Installatie-instructie (4 pagina's), Gebruiksaanwijzing (28 pagina's), Installatie-instructie (4 pagina's), Hardware installatiehandleiding (30 pagina's), Technische beschrijving (26 pagina's), Compacte gebruiksaanwijzing (35 pagina's), Installatie-instructie kit (9 pagina's)

15900-795

Install Mounting Plate and PS2 Assembly onto Actuator

1. Install 5/16" lock washers onto 5/16-18x0.75 Hex head bolts

2. Since mounting plate is intended for several actuator models, be sure fasteners are inserted

through proper slots and/or holes. Proper slots/holes are shaded in table 3 below.

Actuator

Model

Number

M-00

M-11

M-33

M-22

3. Using the two 5/16" hex head bolts, secure mounting plate assembly onto the two actuator

threaded holes. Table 4 illustrates location of bolts within slot so feedback arm is perpendicular to

actuator/valve stem at 50% of travel.

IMPORTANT: Be sure feedback pin engages spring clip and arm slot while making this assembly.

Proper Bracket

Holes/Slots

Shaded Area

TABLE 3, Proper Mounting Holes/Slots

Actuator Model

Number

M-44-78

M-44-108

Proper Bracket

Holes/Slots

Shaded Area