Xerox Synergix 8855 Panduan Tambahan - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Aksesori Printer Xerox Synergix 8855. Xerox Synergix 8855 28 halaman. Windows nt 4.0 postscript print driver user guide
Juga untuk Xerox Synergix 8855: Panduan Pengguna (44 halaman), Panduan Operator (11 halaman), Panduan Tambahan (26 halaman), Manual Perangkat Lunak (30 halaman)

Halaman Cetak

Preparing the Host SCSI Port

Ultra SCSI Port (Host)

To use this port your workstation must have a SCSI interface card and

appropriate software installed and operating.

Enable Controller SCSI Port

Use the Printer_Defaults>Ports menu of the Web PMT to set a device

number compatible with your workstation and to disable the termination. By

default, the host SCSI port bus termination is enabled.

Figure 6 – Typical Web PMT, Ports Setup Page

XES Synergix 8855 Controller Setup Manual for Firmware 7.0

Software Supported

•

ServeWare Version 2.42 or later.

•

VGS (in Xerox 150 Emulation Mode)

Data Formats Supported

•

Xerox 150 Emulation

•

Versatec Raw Raster

•

VDS

•

VCGL

SCSI Cable Description

The SCSI cable must not exceed a maximum length of 9.75 feet (3 meters).