Xerox Synergix 8855 Tamamlayıcı Kılavuz - Sayfa 23
Yazıcı Aksesuarları Xerox Synergix 8855 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Xerox Synergix 8855 28 sayfaları. Windows nt 4.0 postscript print driver user guide
Ayrıca Xerox Synergix 8855 için: Kullanıcı Kılavuzu (44 sayfalar), Operatör El Kitabı (11 sayfalar), Tamamlayıcı Kılavuz (26 sayfalar), Yazılım Kılavuzu (30 sayfalar)
Preparing the Host SCSI Port
Ultra SCSI Port (Host)
To use this port your workstation must have a SCSI interface card and
appropriate software installed and operating.
Enable Controller SCSI Port
Use the Printer_Defaults>Ports menu of the Web PMT to set a device
number compatible with your workstation and to disable the termination. By
default, the host SCSI port bus termination is enabled.
Figure 6 – Typical Web PMT, Ports Setup Page
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
Software Supported
•
ServeWare Version 2.42 or later.
•
VGS (in Xerox 150 Emulation Mode)
Data Formats Supported
•
Xerox 150 Emulation
•
Versatec Raw Raster
•
VDS
•
VCGL
SCSI Cable Description
The SCSI cable must not exceed a maximum length of 9.75 feet (3 meters).
15