Xerox Synergix 8855 Manuale supplementare - Pagina 23
Sfoglia online o scarica il pdf Manuale supplementare per Accessori per stampanti Xerox Synergix 8855. Xerox Synergix 8855 28. Windows nt 4.0 postscript print driver user guide
Anche per Xerox Synergix 8855: Manuale d'uso (44 pagine), Manuale dell'operatore (11 pagine), Manuale supplementare (26 pagine), Manuale del software (30 pagine)
Stampa la pagina
Preparing the Host SCSI Port
Ultra SCSI Port (Host)
To use this port your workstation must have a SCSI interface card and
appropriate software installed and operating.
Enable Controller SCSI Port
Use the Printer_Defaults>Ports menu of the Web PMT to set a device
number compatible with your workstation and to disable the termination. By
default, the host SCSI port bus termination is enabled.
Figure 6 – Typical Web PMT, Ports Setup Page
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
Software Supported
•
ServeWare Version 2.42 or later.
•
VGS (in Xerox 150 Emulation Mode)
Data Formats Supported
•
Xerox 150 Emulation
•
Versatec Raw Raster
•
VDS
•
VCGL
SCSI Cable Description
The SCSI cable must not exceed a maximum length of 9.75 feet (3 meters).
15