Xerox Phaser 7300DN Manual Kertas - Halaman 10

Jelajahi secara online atau unduh pdf Manual Kertas untuk Perangkat lunak Xerox Phaser 7300DN. Xerox Phaser 7300DN 34 halaman. Quick reference guide
Juga untuk Xerox Phaser 7300DN: Panduan Pemecahan Masalah (40 halaman), Fitur (1 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (50 halaman), Panduan Fitur (40 halaman), Manual Dukungan (28 halaman), Setup Manual (18 halaman), Panduan Penyiapan dan Referensi Cepat (45 halaman)

Halaman Cetak
Xerox Phaser 7300DN Manual Kertas
4.
Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper
long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.
Long-edge feed
Use for the following sizes: Letter, A4, and
I
B5 JIS.
Use for transparencies (in Tray 1 only).
I
Transparencies should NOT be loaded in
Trays 2 - 5.
Place the side to be printed facedown with the top
I
of the page at the back of the tray.
Prepunched holes should be on your right as you
I
face the printer.
5.
Slide the tray back into the printer and turn to the front panel.
6.
When the front panel prompts you:
If you haven't changed the type of paper, press the OK key to accept the current setting for
I
paper type.
If you have changed the type of paper, scroll to the correct paper type and press the OK key
I
to save your selection.
Note
To avoid possible print-quality and paper-feed problems, make sure that the tray's paper type
setting matches the loaded paper type.
Phaser® 7300 Color Printer
Short-edge feed
Use for the following sizes: Legal, Tabloid
I
(11 x 17 in.), Tabloid Extra (12 x 18 in.),
Executive, US Folio, A3, SRA3, A5, A6, and
B4 JIS.
Place the side to be printed facedown with the top
I
of the page on your right as you face the printer.
Prepunched holes should be towards the front of
I
the tray.
OK
Trays
6200-45
5