Xerox Phaser 7300DN Paper Manual - Pagina 10

Sfoglia online o scarica il pdf Paper Manual per Software Xerox Phaser 7300DN. Xerox Phaser 7300DN 34. Quick reference guide
Anche per Xerox Phaser 7300DN: Manuale di risoluzione dei problemi (40 pagine), Caratteristiche (1 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (50 pagine), Caratteristiche Manuale (40 pagine), Manuale di supporto (28 pagine), Manuale di configurazione (18 pagine), Manuale di configurazione e riferimento rapido (45 pagine)

Stampa la pagina
Xerox Phaser 7300DN Paper Manual
4.
Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper
long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.
Long-edge feed
Use for the following sizes: Letter, A4, and
I
B5 JIS.
Use for transparencies (in Tray 1 only).
I
Transparencies should NOT be loaded in
Trays 2 - 5.
Place the side to be printed facedown with the top
I
of the page at the back of the tray.
Prepunched holes should be on your right as you
I
face the printer.
5.
Slide the tray back into the printer and turn to the front panel.
6.
When the front panel prompts you:
If you haven't changed the type of paper, press the OK key to accept the current setting for
I
paper type.
If you have changed the type of paper, scroll to the correct paper type and press the OK key
I
to save your selection.
Note
To avoid possible print-quality and paper-feed problems, make sure that the tray's paper type
setting matches the loaded paper type.
Phaser® 7300 Color Printer
Short-edge feed
Use for the following sizes: Legal, Tabloid
I
(11 x 17 in.), Tabloid Extra (12 x 18 in.),
Executive, US Folio, A3, SRA3, A5, A6, and
B4 JIS.
Place the side to be printed facedown with the top
I
of the page on your right as you face the printer.
Prepunched holes should be towards the front of
I
the tray.
OK
Trays
6200-45
5