- ページ 10

ソフトウェア Xerox Phaser 7300DNのPDF ペーパーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Phaser 7300DN 34 ページ。 Quick reference guide
Xerox Phaser 7300DN にも：トラブルシューティングマニュアル (40 ページ), 特徴 (1 ページ), パンフレット＆スペック (4 ページ), ユーザーマニュアル (50 ページ), 機能マニュアル (40 ページ), サポートマニュアル (28 ページ), セットアップマニュアル (18 ページ), セットアップとクイック・リファレンス・マニュアル (45 ページ)

Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper

long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.

Long-edge feed

Use for the following sizes: Letter, A4, and

B5 JIS.

Use for transparencies (in Tray 1 only).

Transparencies should NOT be loaded in

Trays 2 - 5.

Place the side to be printed facedown with the top

of the page at the back of the tray.

Prepunched holes should be on your right as you

face the printer.

Slide the tray back into the printer and turn to the front panel.

When the front panel prompts you:

If you haven't changed the type of paper, press the OK key to accept the current setting for

paper type.

If you have changed the type of paper, scroll to the correct paper type and press the OK key

to save your selection.

Note

To avoid possible print-quality and paper-feed problems, make sure that the tray's paper type

setting matches the loaded paper type.

Phaser® 7300 Color Printer

Short-edge feed

Use for the following sizes: Legal, Tabloid

(11 x 17 in.), Tabloid Extra (12 x 18 in.),

Executive, US Folio, A3, SRA3, A5, A6, and

B4 JIS.

Place the side to be printed facedown with the top

of the page on your right as you face the printer.

Prepunched holes should be towards the front of

the tray.

Trays

6200-45