3D Systems CUBE Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer 3D 3D Systems CUBE. 3D Systems CUBE 20 halaman. Replacing the print tip
Juga untuk 3D Systems CUBE: Dokumentasi (8 halaman), Pelajaran (15 halaman)

Halaman Cetak

When prompted, tighten the lock screw enough to ensure the adjustment knob does

not easily turn. Select the

Caution: Do not over-tighten the lock screw. This can damage the adjustment

knob and void the manufacturer's warranty.

Reinstall the print pad and select the

again.

NOTE: Select

that

Auto Level procedure

Once Auto Level is successful, the printer will begin checking the Z-gap.

NOTE: The printer will perform an automated gap measurement. This may

take a few minutes.

checkmark

SKIP

to bypass the Auto Level procedure. It is recommended

is performed again.

to continue.

checkmark

to perform the Auto Level procedure