3D Systems CUBE Manuale d'uso - Pagina 15
Sfoglia online o scarica il pdf Manuale d'uso per Stampanti 3D 3D Systems CUBE. 3D Systems CUBE 20. Replacing the print tip
Anche per 3D Systems CUBE: Documentazione (8 pagine), Lesson (15 pagine)
Stampa la pagina
4.
When prompted, tighten the lock screw enough to ensure the adjustment knob does
not easily turn. Select the
Caution: Do not over-tighten the lock screw. This can damage the adjustment
knob and void the manufacturer's warranty.
5.
Reinstall the print pad and select the
again.
NOTE: Select
that
Auto Level procedure
6.
Once Auto Level is successful, the printer will begin checking the Z-gap.
NOTE: The printer will perform an automated gap measurement. This may
take a few minutes.
checkmark
SKIP
to bypass the Auto Level procedure. It is recommended
is performed again.
to continue.
checkmark
to perform the Auto Level procedure