Bose Acoustimass 10 Series I Manuale - Pagina 6
Sfoglia online o scarica il pdf Manuale per Altoparlanti Bose Acoustimass 10 Series I. Bose Acoustimass 10 Series I 17. Series 2
Anche per Bose Acoustimass 10 Series I: Manuale d'uso (18 pagine), Manuale d'uso (25 pagine), Manuale d'uso (17 pagine)
Stampa la pagina
DISASSEMBLY/ASSEMBLY PROCEDURES
CUBE ARRAY
Note: Numbers in parentheses correspond
to the item call outs in Figure 3.
1. Grille Removal
1.1 Grasp the grille (13) at the top and
bottom. Catches on the sides hold the grille
to the cube (2). Squeeze and pull the grille
off.
2. Grille Replacement
2.1 Line up the grille (13) so that the
curved edges are located at the top and
bottom. Push the grille onto the cube (2)
until it snaps into place. The bottom grille
should have the Bose
right hand corner.
2. Twiddler™ Removal
2.1 Perform procedure 1 first.
2.2 Remove the four screws (9) that
secure the twiddler (11) to the cube array
(2). Lift the twiddler out of the cube array.
2.3 Cut the wires as close as possible to
the twiddler.
Note: Make a note of the wiring configura-
tion.
3. Twiddler Replacement
3.1 Connect the wires to the twiddler (11).
3.2 Replace the four screws (9) that
secure the twiddler to the cube array (2).
3.3 Perform procedure 2.
®
logo in the lower
6