Cisco UCS B200 M3 Nota di installazione e manutenzione - Pagina 17

Sfoglia online o scarica il pdf Nota di installazione e manutenzione per Server Cisco UCS B200 M3. Cisco UCS B200 M3 28. Blade server
Anche per Cisco UCS B200 M3: Manuale di installazione (34 pagine), Nota di installazione e manutenzione (36 pagine), Nota di installazione e manutenzione (37 pagine), Manuale (8 pagine), Manuale di aggiornamento (21 pagine)

Figure 13: Using the CPU Pick and Place Tool to Insert the CPU

Step 6

Close the socket latch. See callout 1 in the following figure.

Step 7

Secure the first hook, which has the following icon: See callout 2 in the following figure.

Step 8

Secure the second hook, which has the following icon:

Figure 14: Replacing the Heat Sink (B200 M3 Shown)

Step 9

Using the syringe of thermal grease provided with replacement CPUs and servers, add 2 cubic centimeters of thermal

grease to the top of the CPU where it will contact the heat sink. Use the pattern shown. This should require half the

contents of the syringe.

Caution

The thermal grease has very specific thermal properties. Thermal grease from other sources should not be

substituted because it may lead to damage.

Alignment mark on the tool

button/handle

See callout 3 in the following figure.

Alignment mark on the CPU

socket