Cisco UCS B200 M4 Nota di installazione e manutenzione - Pagina 17

Sfoglia online o scarica il pdf Nota di installazione e manutenzione per Server Cisco UCS B200 M4. Cisco UCS B200 M4 30. For e5-2600 v4 series cpus
Anche per Cisco UCS B200 M4: Nota di installazione e manutenzione (46 pagine), Manuale di aggiornamento (9 pagine), Manuale di manutenzione (24 pagine)

Step 3

Unhook the self-loading socket (SLS) lever

Step 4

Unhook the SLS lever .

Step 5

Grasp the sides of the CPU carrier (indicated by the arrows in the illustration) and swing it into a standing position in the

SLS plug seat.

Figure 12: CPU Carrier and SLS Plug Seat

Step 6

Pull the CPU carrier up and out of the SLS plug seat.

Installing a New CPU and Heat Sink

Before installing a new CPU in a server, verify the following:

• The CPU is supported for that given server model. This may be verified through the server Technical Specifications ordering

guides or by the relevant release of the Cisco UCS Capability Catalog.

• A BIOS update is available and installed that supports the CPU and the given server configuration.

• If the server will be managed by Cisco UCS Manager, the service profile for this server in Cisco UCS Manager will recognize

and allow the new CPU.

• The CPUs and heat sinks are different and must be installed in the correct location. The front heat sink and CPU 1 can only be

installed in the front of the blade server and the rear heat sink and CPU 2 can only be installed in the rear of the blade server.