3D Systems CUBE Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Stampanti 3D 3D Systems CUBE. 3D Systems CUBE 20. Replacing the print tip
Anche per 3D Systems CUBE: Documentazione (8 pagine), Lesson (15 pagine)

Stampa la pagina
3D Systems CUBE Manuale d'uso
NOTE: The Auto Level procedure will begin.
3.
Once the Auto Level procedure has completed, select the
Gap. If the print pad is out of range, proceed to the
4.
The printer will begin checking the Z-gap.
NOTE: The printer will perform an automated gap measurement. This may
take a few minutes.
5.
If Auto Gap is successful, select the
Manual Level
checkmark
to continue.
checkmark
to verify the Z-
procedure.