- ページ 10

制御システム BobsCNC KL744のPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。BobsCNC KL744 20 ページ。 Table assembly
BobsCNC KL744 にも： はじめに (9 ページ), 組立マニュアル (12 ページ)

ページを印刷する
BobsCNC KL744 組立マニュアル
With the X2 Mid Rail assembly on a large flat work surface set the
Step 4
third X2 Mid Rail beside it as shown.
NOTE: In the photo below the assembly is setting on the KL744 Optional Table.
Align slots of the X Frame Side Assembly with the X2 Mid Rail Supports as
shown. Carefully slide the slots down until the bottom of the slot rests on the
base of X Frame Side Assembly. The tabs on the X2 Mid Rail Supports will fit
in slots of the X Frame Side Assembly. Secure with four 5/16 x 1 1/4 Machine
Screws and Nuts.
Repeat to install the remaining X Frame Side Assembly on the opposite
side.
Slot
Page 10
Tab