BobsCNC KL744 Руководство по сборке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по сборке для Системы управления BobsCNC KL744. BobsCNC KL744 20 страниц. Table assembly
Также для BobsCNC KL744: Начало работы (9 страниц), Руководство по сборке (12 страниц)

Печатать страницу
BobsCNC KL744 Руководство по сборке
With the X2 Mid Rail assembly on a large flat work surface set the
Step 4
third X2 Mid Rail beside it as shown.
NOTE: In the photo below the assembly is setting on the KL744 Optional Table.
Align slots of the X Frame Side Assembly with the X2 Mid Rail Supports as
shown. Carefully slide the slots down until the bottom of the slot rests on the
base of X Frame Side Assembly. The tabs on the X2 Mid Rail Supports will fit
in slots of the X Frame Side Assembly. Secure with four 5/16 x 1 1/4 Machine
Screws and Nuts.
Repeat to install the remaining X Frame Side Assembly on the opposite
side.
Slot
Page 10
Tab