BobsCNC KL744 Montagehandleiding - Pagina 10

Blader online of download pdf Montagehandleiding voor {categorie_naam} BobsCNC KL744. BobsCNC KL744 20 pagina's. Table assembly
Ook voor BobsCNC KL744: Aan de slag (9 pagina's), Montagehandleiding (12 pagina's)

Pagina afdrukken
BobsCNC KL744 Montagehandleiding
With the X2 Mid Rail assembly on a large flat work surface set the
Step 4
third X2 Mid Rail beside it as shown.
NOTE: In the photo below the assembly is setting on the KL744 Optional Table.
Align slots of the X Frame Side Assembly with the X2 Mid Rail Supports as
shown. Carefully slide the slots down until the bottom of the slot rests on the
base of X Frame Side Assembly. The tabs on the X2 Mid Rail Supports will fit
in slots of the X Frame Side Assembly. Secure with four 5/16 x 1 1/4 Machine
Screws and Nuts.
Repeat to install the remaining X Frame Side Assembly on the opposite
side.
Slot
Page 10
Tab