- ページ 17

タイマー Autonics LE4S SeriesのPDF インストラクションをオンラインで閲覧またはダウンロードできます。Autonics LE4S Series 18 ページ。 Lcd digital timers
Autonics LE4S Series にも：マニュアル (17 ページ), マニュアル (6 ページ)

ページを印刷する

LE4S Series

Interval mode

It is able to make Instantaneous ON and time limit OFF

(Holding device) with using interval mode.

T : Timer

Instan-

START

taneous

Time

limit

Load

Change of output operation mode and

timer range

If changing output operation mode or time range,previous

reset value will be deleted.

But, UP/DOWN selection mode and lock mode are

exception.

Change of preset value

● If changing setting value while time progressing, new

preset value should be higher than previous preset

value.

Otherwise output may work while changing setting

value.

● If changing setting value while it is running, it will work as

changed setting value. Please use lock function in order

to avoid malfunction.

Noise

We test 2kV, pulse width 1㎲ against Impulse voltage

between power terminals and 1kV, pulse width 1㎲ at noise

simulator against external noise voltage. Please install MP

condensor (0.1 to 1㎌) or oil condensor between power

teminals when over impulse noise voltage occurs.

Environment

Please avoid the following places;

● Where this product may be damaged by strong impact or

vibration.

● Where there are corrosive gas or flammable gas and

water, oil, dust exist.

● Where magnetic and electrical noise occurs.

● Where there are high temperature and humidity beyond

rated specification.

● Where there are strong alkalis and acids.

● Where there are direct rays of sun.

K-36

START

Time

limit

LE4S

Load