Autonics LE4S Series Talimatlar - Sayfa 17

Zamanlayıcı Autonics LE4S Series için çevrimiçi göz atın veya pdf Talimatlar indirin. Autonics LE4S Series 18 sayfaları. Lcd digital timers
Ayrıca Autonics LE4S Series için: Manuel (17 sayfalar), Manuel (6 sayfalar)

Sayfayı Yazdır

LE4S Series

Interval mode

It is able to make Instantaneous ON and time limit OFF

(Holding device) with using interval mode.

T : Timer

Instan-

START

taneous

Time

limit

Load

Change of output operation mode and

timer range

If changing output operation mode or time range,previous

reset value will be deleted.

But, UP/DOWN selection mode and lock mode are

exception.

Change of preset value

● If changing setting value while time progressing, new

preset value should be higher than previous preset

value.

Otherwise output may work while changing setting

value.

● If changing setting value while it is running, it will work as

changed setting value. Please use lock function in order

to avoid malfunction.

Noise

We test 2kV, pulse width 1㎲ against Impulse voltage

between power terminals and 1kV, pulse width 1㎲ at noise

simulator against external noise voltage. Please install MP

condensor (0.1 to 1㎌) or oil condensor between power

teminals when over impulse noise voltage occurs.

Environment

Please avoid the following places;

● Where this product may be damaged by strong impact or

vibration.

● Where there are corrosive gas or flammable gas and

water, oil, dust exist.

● Where magnetic and electrical noise occurs.

● Where there are high temperature and humidity beyond

rated specification.

● Where there are strong alkalis and acids.

● Where there are direct rays of sun.

K-36

START

Time

limit

LE4S

Load