- ページ 14

コントロールユニット GAPOSA QC101のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GAPOSA QC101 16 ページ。 Single-phase control unit

RESET

Through the reset procedure:

• all memorised transmitters will be deleted

• the programming of pause time and of the stroke are reset to default

conditions (working time of 30 seconds, automatic closing disabled).

• the "Emergency mode with faulty bar" is also turned off.

During the reset procedure, all controls are inhibited.

To reset the control unit, you must:

1. Place all DIP in OFF

2. Place DIP 5 and 6 in ON

3. The green LED will switch off while the red one will start flashing

rapidly. After the reset, the red LED switches off while the green LED

will start making three quick flashes every 3 seconds.

4. Place DIP 5 and 6 in OFF. The green LED will remain ON and steady and

the reset procedure is completed.

5. You can now reposition the DIP according to the desired functions.