GAPOSA QC101 사용 설명서 - 페이지 14

{카테고리_이름} GAPOSA QC101에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA QC101 16 페이지. Single-phase control unit

RESET

Through the reset procedure:

• all memorised transmitters will be deleted

• the programming of pause time and of the stroke are reset to default

conditions (working time of 30 seconds, automatic closing disabled).

• the "Emergency mode with faulty bar" is also turned off.

During the reset procedure, all controls are inhibited.

To reset the control unit, you must:

1. Place all DIP in OFF

2. Place DIP 5 and 6 in ON

3. The green LED will switch off while the red one will start flashing

rapidly. After the reset, the red LED switches off while the green LED

will start making three quick flashes every 3 seconds.

4. Place DIP 5 and 6 in OFF. The green LED will remain ON and steady and

the reset procedure is completed.

5. You can now reposition the DIP according to the desired functions.