- ページ 2

配管製品 Kohler 10EKDのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler 10EKD 17 ページ。
Kohler 10EKD にも：インストレーション・インストラクション (4 ページ)

ページを印刷する

Procedure

Remove the generator set from service.

1.1

Push the generator set power button OFF.

1.2

Disconnect power to the battery charger, if

equipped.

1.3

Disconnect the generator set engine starting

battery, negative (--) lead first.

Remove the sound shield, if equipped.

2.1

Remove the three 5/16 in. x 2.5 in. bolts from the

sound shield roof. See Figure 1.

Top View

1. 5/16 in. x 2.5 in. bolts (qty. 3)

Figure 1 Roof Bolt Removal

2.2

Release the two latches on the service side door

to remove the service-side door. See Figure 2.

Service-Side View

1. Latches (qty. 2)

Figure 2 Service-Side Door Removal

2.3

Remove the 5/16 in. x 1.75 in. bolt to remove the

engine end door. See Figure 3.

GM55219C

Engine-End View

1. 5/16 in. x 1.75 in. bolt

Figure 3 Engine-End Door Removal

2.4

Remove the 5/16 in. x 1.75 in. bolts to remove the

exhaust panel and the generator-end door. See

Figure 4.

Generator-End View

1. 5/16 in. x 1.75 in. bolt on exhaust panel

2. 5/16 in. x 1.75 in. bolt on generator-end door

Figure 4 Exhaust Panel and Generator-End Door

Removal

2.5

Remove the two 5/16 in. x 0.625 in. bolts on the

nonservice-side door.

removed, remove the roof and remaining panels.

Nonservice-Side View

1. 5/16 in. x 0.625 in. bolts (qty. 2)

Figure 5 Nonservice-Side Door Removal

GM55219C

After these bolts are

GM55219C

TT-1617

12/13