- ページ 15

バスルーム設備 Kohler BodySpa K-1000のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler BodySpa K-1000 28 ページ。 Tower custom hydro-massage system
Kohler BodySpa K-1000 にも：ホームオーナーズマニュアル (48 ページ)

ページを印刷する

G. ADJUST HEADER HEIGHT

Slide all three door panels to the center, and measure and

record the distance from the footbath curb to the header

at three locations:

the left corner, along the wall jamb;

the right corner, along the wall jamb;

the center, along the center door panel.

If the three measurements are the same, no header

adjustment is required. Occasionally, the center height

measurement will be different from the corner measure-

ments. In these cases, adjust the header in this manner:

Loosen one of the buttonhead screws about two complete

turns. Next loosen the corresponding adjustment screw a

complete turn or two, and retighten the buttonhead screw.

Check the center height measurement. Repeat this

procedure until half the needed height correction is

obtained.

Repeat this adjustment procedure on the other end of the

header.

TE:

Remember that the center height measurement

must be the same as the corner measurements when the

doors are in the center.

H. INSTALL THE CENTER JAMB ASSEMBLIES

Press a center jamb assembly against the center

expander. Secure with six #8 x 1" panhead screws. Do not

overtighten.

Repeat for the other side.

Kohler Co., Kohler WI U.S.A.

Header

Center Jamb

#8 x 1" Panhead

Screws

Buttonhead Screw

Adjustment Screw

Header Bracket

Center

Expander

Center Jamb

TOP VIEW

116290-2-