- ページ 27

サーバー Dell Active Fabric ManagerのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell Active Fabric Manager 44 ページ。 Active fabric manager installation guide 1.5
Dell Active Fabric Manager にも: インストレーション・マニュアル (19 ページ)

Figure 16. Network Configuration Settings
4. Modify the following settings as needed:
Name — Assign the name of AFM Server
Device — Assign or select the NIC Card to be used.
Use DHCP — Select to enable DHCP to assign an IP address to the VM
Static IP — Specify the static IP Address of the AFM server.
NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination host is
unreachable assign the same IP address.
Netmask — Specify the subnet mask of the static IP address for the AFM Server.
Default gateway IP — Specify the gateway IP Address of the AFM server.
Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM
Server, use this option.
Secondary DNS Server — Specify the secondary DNS server address.
5. Select OK to save your changes.
6. Select Quit to exit this screen.
To configure AFM DNS settings:
1. Select the Configure System option.
2. Select the DNS configuration option.
To navigate between elements, use the Tab and down arrow.
3. Modify the following settings as needed:
27