Dell Active Fabric Manager Посібник з монтажу - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Dell Active Fabric Manager. Dell Active Fabric Manager 44 сторінки. Active fabric manager installation guide 1.5
Також для Dell Active Fabric Manager: Посібник з монтажу (19 сторінок)
Figure 16. Network Configuration Settings
4. Modify the following settings as needed:
–
Name — Assign the name of AFM Server
–
Device — Assign or select the NIC Card to be used.
–
Use DHCP — Select to enable DHCP to assign an IP address to the VM
–
Static IP — Specify the static IP Address of the AFM server.
NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination host is
unreachable assign the same IP address.
–
Netmask — Specify the subnet mask of the static IP address for the AFM Server.
–
Default gateway IP — Specify the gateway IP Address of the AFM server.
–
Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM
Server, use this option.
–
Secondary DNS Server — Specify the secondary DNS server address.
5. Select OK to save your changes.
6. Select Quit to exit this screen.
To configure AFM DNS settings:
1. Select the Configure System option.
2. Select the DNS configuration option.
To navigate between elements, use the Tab and down arrow.
3. Modify the following settings as needed:
27