Dell Active Fabric Manager 설치 매뉴얼 - 페이지 27

{카테고리_이름} Dell Active Fabric Manager에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Active Fabric Manager 44 페이지. Active fabric manager installation guide 1.5
Dell Active Fabric Manager에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지)

페이지 인쇄

Figure 16. Network Configuration Settings

4. Modify the following settings as needed:

–

Name — Assign the name of AFM Server

–

Device — Assign or select the NIC Card to be used.

–

Use DHCP — Select to enable DHCP to assign an IP address to the VM

–

Static IP — Specify the static IP Address of the AFM server.

NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination host is

unreachable assign the same IP address.

–

Netmask — Specify the subnet mask of the static IP address for the AFM Server.

–

Default gateway IP — Specify the gateway IP Address of the AFM server.

–

Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM

Server, use this option.

–

Secondary DNS Server — Specify the secondary DNS server address.

5. Select OK to save your changes.

6. Select Quit to exit this screen.

To configure AFM DNS settings:

1. Select the Configure System option.

2. Select the DNS configuration option.

To navigate between elements, use the Tab and down arrow.

3. Modify the following settings as needed: