Dell Active Fabric Manager Instrukcja instalacji - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Dell Active Fabric Manager. Dell Active Fabric Manager 44 stron. Active fabric manager installation guide 1.5
Również dla Dell Active Fabric Manager: Instrukcja instalacji (19 strony)
Figure 16. Network Configuration Settings
4. Modify the following settings as needed:
–
Name — Assign the name of AFM Server
–
Device — Assign or select the NIC Card to be used.
–
Use DHCP — Select to enable DHCP to assign an IP address to the VM
–
Static IP — Specify the static IP Address of the AFM server.
NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination host is
unreachable assign the same IP address.
–
Netmask — Specify the subnet mask of the static IP address for the AFM Server.
–
Default gateway IP — Specify the gateway IP Address of the AFM server.
–
Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM
Server, use this option.
–
Secondary DNS Server — Specify the secondary DNS server address.
5. Select OK to save your changes.
6. Select Quit to exit this screen.
To configure AFM DNS settings:
1. Select the Configure System option.
2. Select the DNS configuration option.
To navigate between elements, use the Tab and down arrow.
3. Modify the following settings as needed:
27