- ページ 3

IP電話 Cisco 3905のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3905 16 ページ。 Cisco systems telephone user manual
Cisco 3905 にも: ユーザーマニュアル (14 ページ), ユーザーマニュアル (40 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (3 ページ), 特徴 (6 ページ), ユーザーマニュアル (40 ページ), 特徴 (11 ページ), ユーザーマニュアル (36 ページ), クイック・リファレンス・マニュアル (2 ページ), マニュアルの使用 (16 ページ), ユーザーマニュアル (2 ページ), (ポルトガル語)クイック・スタート・マニュアル (1 ページ)

Cisco 3905 ユーザーマニュアル
3001736-EFC21-EFC25-UK

1. Product information

1.1 Application

EFC21 and EFC25 are used to control gas fireplaces that have exodraft chimney fans installed.
The control system functions as a safety monitoring system and will switch off the gas fireplace if
there is insufficient chimney draught.
The system has been developed in accordance with standards BS 5440-1: 2008,
BS 6644 :2005+A1:2008, Appliances Burning Gaseous Fuels Directive 2009/142/EEC and
EN298 (2012).
Functions
The fan will start at full speed when the EFC21/25 is activated. Once the system detects there is suf-
ficient chimney draught, the gas fireplace can be lit and the fan speed will fall to the pre-set level.
The control has a step-up function and a built-in 15 second delay to avoid inadvertent cut-outs. If
the control system is switched off the chimney fan will stop.
But an optional three-minute run on can be set by the DIP switch.
The EFC25 has a remote control so the user can select a high or low flame look
(if the gas fireplace has this at function).
The EFC25 can also be used for normal ventilation.
Fail-safe settings
The system's fail-safe settings can be changed in accordance with national laws and regulations.
The following function is available:
• RESET (manual/automatic) in the case of power failure or faulty chimney draught.
UK 3