プロジェクター Epson 730c - PowerLite ProjectorのPDF クイックセットアップをオンラインで閲覧またはダウンロードできます。Epson 730c - PowerLite Projector 2 ページ。 Compartibility with elmo hv-110xg document camera
Epson 730c - PowerLite Projector にも：ユーザーマニュアル (1 ページ), 仕様書 (2 ページ), インストレーション・マニュアル (19 ページ), ユーザーマニュアル (1 ページ), 技術概要 (7 ページ), 製品サポート速報 (17 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (2 ページ)

onnect the projector

to your laptop

For most setups, you'll need just these two cables:

Power cord

Make sure your projector and laptop are turned off.

Connect one end of the computer cable to the

Computer/Component Video port on the projector.

Connect the other end to your laptop's video or

If you can't connect the cable to your PowerBook,

to use an adapter. See your User's Guide for instructions.

urn on your equipment

Connect the power cord to your projector and plug

the other end into an electrical outlet.

Remove the lens cover.

Press the red Power button. The power light

flashes green, and then stays on.

Turn on or restart your laptop. (Windows

see this Add New Hardware screen, click Cancel.)

Computer cable

monitor port.

you may need

Lens cover

Power light

only: If you

EPSON

PowerLite

Quick Setup

Follow these instructions to connect the projector

to your laptop. To connect other devices, such as

a VCR or desktop PC, see your User's Guide.

Caution: Before unplugging

the projector...

To shut the projector down properly:

1. Press the red Power button twice.

Let the projector cool while the

(about 45 seconds).

2. Once the light stops flashing and

stays on, it's safe to unplug

the projector.

Never unplug the projector when

the

flashing orange.

Turn over

720c/730c

power light flashes orange

power light is green or