Epson 730c - PowerLite Projector Quick Setup

Browse online or download pdf Quick Setup for Projector Epson 730c - PowerLite Projector. Epson 730c - PowerLite Projector 2 pages. Compartibility with elmo hv-110xg document camera
Also for Epson 730c - PowerLite Projector: User Manual (1 pages), Specification Sheet (2 pages), Installation Manual (19 pages), User Manual (1 pages), Technical Brief (7 pages), Product Support Bulletin (17 pages), Product Support Bulletin (3 pages), Product Support Bulletin (2 pages)

Print Page
Epson 730c - PowerLite Projector Quick Setup
C
onnect the projector
to your laptop
For most setups, you'll need just these two cables:
Power cord
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer/Component Video port on the projector.
3
Connect the other end to your laptop's video or
If you can't connect the cable to your PowerBook,
to use an adapter. See your User's Guide for instructions.
T
urn on your equipment
1
Connect the power cord to your projector and plug
the other end into an electrical outlet.
2
Remove the lens cover.
3
Press the red Power button. The power light
flashes green, and then stays on.
4
Turn on or restart your laptop. (Windows
see this Add New Hardware screen, click Cancel.)
Computer cable
monitor port.
®
you may need
Lens cover
Power light
®
only: If you
EPSON
®
PowerLite

Quick Setup

Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your User's Guide.
Caution: Before unplugging
the projector...
To shut the projector down properly:
1. Press the red Power button twice.
Let the projector cool while the
(about 45 seconds).
2. Once the light stops flashing and
stays on, it's safe to unplug
the projector.
Never unplug the projector when
the
flashing orange.
Turn over
®
720c/730c
power light flashes orange
power light is green or