Epson 730c - PowerLite Projector Hızlı Kurulum

Projektör Epson 730c - PowerLite Projector için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Epson 730c - PowerLite Projector 2 sayfaları. Compartibility with elmo hv-110xg document camera
Ayrıca Epson 730c - PowerLite Projector için: Kullanıcı Kılavuzu (1 sayfalar), Şartname Sayfası (2 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Teknik Özet (7 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (2 sayfalar)

Sayfayı Yazdır
Epson 730c - PowerLite Projector Hızlı Kurulum
C
onnect the projector
to your laptop
For most setups, you'll need just these two cables:
Power cord
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer/Component Video port on the projector.
3
Connect the other end to your laptop's video or
If you can't connect the cable to your PowerBook,
to use an adapter. See your User's Guide for instructions.
T
urn on your equipment
1
Connect the power cord to your projector and plug
the other end into an electrical outlet.
2
Remove the lens cover.
3
Press the red Power button. The power light
flashes green, and then stays on.
4
Turn on or restart your laptop. (Windows
see this Add New Hardware screen, click Cancel.)
Computer cable
monitor port.
®
you may need
Lens cover
Power light
®
only: If you
EPSON
®
PowerLite

Quick Setup

Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your User's Guide.
Caution: Before unplugging
the projector...
To shut the projector down properly:
1. Press the red Power button twice.
Let the projector cool while the
(about 45 seconds).
2. Once the light stops flashing and
stays on, it's safe to unplug
the projector.
Never unplug the projector when
the
flashing orange.
Turn over
®
720c/730c
power light flashes orange
power light is green or