Epson 730c - PowerLite Projector Snelle installatie

Blader online of download pdf Snelle installatie voor {categorie_naam} Epson 730c - PowerLite Projector. Epson 730c - PowerLite Projector 2 pagina's. Compartibility with elmo hv-110xg document camera
Ook voor Epson 730c - PowerLite Projector: Gebruikershandleiding (1 pagina's), Specificatieblad (2 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Product ondersteunings bulletin (17 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's)

onnect the projector

to your laptop

For most setups, you'll need just these two cables:

Power cord

Make sure your projector and laptop are turned off.

Connect one end of the computer cable to the

Computer/Component Video port on the projector.

Connect the other end to your laptop's video or

If you can't connect the cable to your PowerBook,

to use an adapter. See your User's Guide for instructions.

urn on your equipment

Connect the power cord to your projector and plug

the other end into an electrical outlet.

Remove the lens cover.

Press the red Power button. The power light

flashes green, and then stays on.

Turn on or restart your laptop. (Windows

see this Add New Hardware screen, click Cancel.)

Computer cable

monitor port.

you may need

Lens cover

Power light

only: If you

EPSON

PowerLite

Quick Setup

Follow these instructions to connect the projector

to your laptop. To connect other devices, such as

a VCR or desktop PC, see your User's Guide.

Caution: Before unplugging

the projector...

To shut the projector down properly:

1. Press the red Power button twice.

Let the projector cool while the

(about 45 seconds).

2. Once the light stops flashing and

stays on, it's safe to unplug

the projector.

Never unplug the projector when

the

flashing orange.

Turn over

720c/730c

power light flashes orange

power light is green or