- ページ 7

ネットワーク・ハードウェア Cisco TelePresence Server 7010のPDF はじめにをオンラインで閲覧またはダウンロードできます。Cisco TelePresence Server 7010 16 ページ。 600w ac-input power supply and fan tray replacement
Cisco TelePresence Server 7010 にも：交換取扱説明書 (23 ページ), 取付説明書 (15 ページ), インストレーション・マニュアル (14 ページ), 交換取扱説明書 (18 ページ)

ページを印刷する

Connecting the Cisco TS 7010

Before you start

Important:

information at http://www.cisco.com/go/telepresence/safety.

Step one: Connect power

Connect the power connector on the rear of the unit to the power supply using the

supplied power cable (there is no On/Off switch).

Step two: Connect to Ethernet Port A

Connect an Ethernet cable from Ethernet Port A to an Ethernet switch. The

Ethernet port is a 10/100/1000 Mbps auto-sensing connection.

Ethernet Ports B, C and D may not be supported in the software supplied

with your Cisco TS 7010. Do not connect to these ports unless the web

interface allows you to configure them. Do not connect multiple ports to

the same subnet unless instructed to do so by the web interface.

Before installing the unit, you must read the safety

Connecting the Cisco TS 7010