- ページ 11

サーバー Cisco UCS B200 M4のPDF 整備マニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M4 24 ページ。 For e5-2600 v4 series cpus
Cisco UCS B200 M4 にも：インストールとサービスノート (30 ページ), インストールとサービスノート (46 ページ), アップグレードマニュアル (9 ページ)

Servicing a Blade Server

Figure 8: CPU Carrier and SLS Plug Seat

Step 6

Pull the CPU carrier up and out of the SLS plug seat.

Installing a New CPU and Heat Sink

Before installing a new CPU in a server, verify the following:

• A BIOS update is available and installed that supports the CPU and the given server configuration.

• The service profile for this server in Cisco UCS Manager will recognize and allow the new CPU.

• The CPUs and heat sinks are different and must be installed in the correct location. The front heat sink

Procedure

Step 1

Hold the CPU carrier by its sides (indicated by the arrows). Insert and align the two CPU carrier pegs into

the self-loading socket (SLS) plug seat. To ensure proper seating, verify that the horizontal yellow line below

the word ALIGN is straight.

and CPU 1 can only be installed in the front of the blade server and the rear heat sink and CPU 2 can

only be installed in the rear of the blade server.

Installing a New CPU and Heat Sink

Servicing a Blade Server