- ページ 8

アクセサリー 3Doodler Create+のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3Doodler Create+ 11 ページ。
3Doodler Create+ にも：ユーザーマニュアル (16 ページ)

ページを印刷する

My Pen won't heat

up (LED light stays

red)

SECTION 4: TIPS AND BEST PRACTICES

Pay attention

to filament types

and settings

Switching

between filament

types

Do not forget

to snip your

Plastic ends

02/2022

It takes around 60-90 seconds for your pen to heat up. If, after that time,

the pen still does not heat up and the LED light remains RED, turn the

Pen OFF and back ON and try again. If that still does not work, please

[email protected]

•

For optimal Doodling, we suggest using the correct temperature settings

for your plastic.

•

Double check which type of plastic you are using before you set your

pen to the correct temperature setting (

strands get mixed up, here is a handy table for sorting and identifying

what you're working with.

•

For more detailed information on filament types, visit our FAQ:

learn.the3Doodler.com/faqs/.

PLA:

Temp: PLA Temp

LED Light:

GREEN

Feature: Glossy plastic sticks to

fabric, windows, metal and other

hard surfaces.

How to tell: Very rigid, no white

semi-circle ends.

•

If you go from

PLA

to ABS, after clearing as much of the

adjust the filament setting on the pen to ABS/FLX, and then load in your

ABS

strand and start extruding.

•

If you're going from

ABS

to PLA, after clearing as much of the

can, insert a strand of

PLA

FLX

setting. As soon as you see your new material extruding out, set the

temperature to the proper

•

After removing a strand of plastic from the 3Doodler Create+,

cut and discard any partially melted material at the end of

the strand. This will reduce blockages or clogging issues.

and we will assist further.

. If your plastic

PLA

or ABS/FLX)

WOOD:

Temp: PLA Temp

LED Light:

GREEN

Feature: Great for embelishing

wood projects, this plant-based

material can be sanded and

stained!

How to tell: Real wood fibers

give the strands a rough texture.

and begin extruding while still on the

PLA

setting.

SECTION 4: TIPS & BEST PRACTICES

ABS:

Temp: ABS / FLX Temp

LED Light:

BLUE

Feature: Extruded plastic has

a matte finish. Great for drawing

in the air.

How to tell: Plastic has white

semi-circle ends.

PLA

as you can,

ABS

as you

ABS/

Snipped Ends

Unsnipped Ends