- ページ 14

マトリックススイッチャー CYP CMSI-8D8DSのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CMSI-8D8DS 20 ページ。 8×8 dvi matrix
CYP CMSI-8D8DS にも：操作マニュアル (16 ページ)

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit you wish to and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.