CYP CMSI-8D8DS Kullanım Kılavuzu - Sayfa 14

Matris Anahtarlayıcı CYP CMSI-8D8DS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CMSI-8D8DS 20 sayfaları. 8×8 dvi matrix
Ayrıca CYP CMSI-8D8DS için: Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit you wish to and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.