CYP CMSI-8D8DS Operation Manual - Page 14

Browse online or download pdf Operation Manual for Matrix Switcher CYP CMSI-8D8DS. CYP CMSI-8D8DS 20 pages. 8×8 dvi matrix
Also for CYP CMSI-8D8DS: Operation Manual (16 pages)

Print Page

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit you wish to and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.