CYP CMSI-8D8DS 운영 매뉴얼 - 페이지 14

{카테고리_이름} CYP CMSI-8D8DS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CMSI-8D8DS 20 페이지. 8×8 dvi matrix
CYP CMSI-8D8DS에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit you wish to and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.