Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)
페이지 인쇄
2-5. Warnings
Warning
Low ink
Print head temperature
rise
Protection of excess rise
of the print head
temperature
Restrictions on paper
USB cable not
connected
Cancellation of image
select information
Message on the LCD
"!" is indicated for an applicable ink tank icon in
the Status Monitor.
If the print head temperature does not fall, the
print head error will occur.
If the print head temperature does not fall, the
print head error will occur.
The current paper cannot be set. Change the size
and type.
Set the PC to start scan.
Reset the selected photo information?
Yes
No
Do you want to clear the image scanned from the
photo?
Yes
No
Do you want to clear the scanned image and
rescan?
Yes
No
No special solution.
Since the ink will be used up soon, prepare for a
new ink tank.
When the print head temperature falls, the error is
automatically cleared.
If the print head error is indicated, repair servicing
is required.
If the print head temperature exceeds the specified
limit, an intermission is inserted during printing.
Re-select the supported paper type and size.
Connect the USB cable, then turn on the computer.
- Select Yes, and press the OK button.
=> The image selection is cancelled, and the
menu or sub-menu is displayed.
- Select No, and press the OK button.
=> The LCD returns to the display
immediately before the message was
displayed.
11 / 41
Solution