Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)

페이지 인쇄

attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##769

After transmitting PPS-EOP in ECM transmission, re-transmission of the procedure signal has been

attempted the number of specified times but failed.

##770

After transmitting EOR-NULL in ECM transmission, no significant signal has been received, and re-

transmission of the procedure signal has been attempted the number of specified times but failed.

##772

After transmitting EOR-NULL in ECM transmission, DCN has been received.

##773

After transmitting EOR-NULL in ECM transmission, re-transmission of the procedure signal has been

attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##774

After transmitting EOR-NULL in ECM transmission, ERR has been received.

##775

After transmitting EOR-MPS in ECM transmission, no significant signal has been received, and re-

transmission of the procedure signal has been attempted the number of specified times but failed.

##777

After transmitting EOR-MPS in ECM transmission, DCN has been received.

##778

After transmitting EOR-MPS in ECM transmission, re-transmission of the procedure signal has been

attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##779

After transmitting EOR-MPS in ECM transmission, ERR has been received.

##780

After transmitting EOR-EOM in ECM transmission, no significant signal has been received, and re-

transmission of the procedure signal has been attempted the number of specified times but failed.

##782

After transmitting EOR-EOM in ECM transmission, DCN has been received.

##783

After transmitting EOR-EOM in ECM transmission, re-transmission of the procedure signal has been

attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##784

After transmitting EOR-EOM in ECM transmission, ERR has been received.

##785

After transmitting EOR-EOP in ECM transmission, no significant signal has been received, and re-

transmission of the procedure signal has been attempted the number of specified times but failed.

##787

After transmitting EOR-EOP in ECM transmission, DCN has been received.

##788

After transmitting EOR-EOP in ECM transmission, re-transmission of the procedure signal has been

attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##789

After transmitting EOR-EOP in ECM transmission, ERR has been received.

##790

After receiving EOR-EOP in ECM reception, ERR has been transmitted.

##791

TX / RX During the ECM mode procedure, a signal other than a significant one has been received.

##792

In ECM reception, PPS-NULL between partial pages has not been detected.

##793

During high-speed signal reception in ECM, no effective frame has been detected, and a time-over has

occurred.

9 / 41