Baumer GIM500R 매뉴얼 - 페이지 21
{카테고리_이름} Baumer GIM500R에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer GIM500R 29 페이지. Inclination sensors
Baumer GIM500R에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (13 페이지), 조립 지침 (2 페이지)
Range request
Sensors can also be searched for within a certain range. For this purpose, the following objects are sent in
sequence:
7E5h 46h
Vendor ID
7E5h 47h
Product code
7E5h 48h
Revision number LOW
7E5h 49h
Revision number HIGH
7E5h 4Ah
Serial number LOW
7E5h 4Bh
Serial number HIGH
Each sensor with the relevant parameters logs on with the following message:
7E4h 4Fh
reserved
Object Dictionary
3.4
According to CiA (CAN in Automation) the objects are subdivided into three groups:
Standard communication objects:
1000h – 1FFFh
Manufacturer-specific objects:
2000h - 5FFFh
Device-specific objects:
6000h - FFFFh
The table below is giving a summary of all SDO objects supported by the inclination sensor.
Object
Object number in Hex
Name
Name of the parameter
Format
Data type
Access
ro = ReadOnly, wo = WriteOnly, rw = ReadWrite
Default
Default upon first init or restore default
yes saved in None Volatile Memory
Save
Baumer_GIM500R_CANopen_MA_EN.docx
03.19
reserved
reserved
reserved
reserved
reserved
reserved
21/29
www.baumer.com