Daintree GE current Lumination LPL Gen D Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Daintree GE current Lumination LPL Gen D Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daintree GE current Lumination LPL Gen D Series 4 페이지. Led luminaire

페이지 인쇄

Lumination

LPL Gen D Series

Luminaire Installation

TURN OFF POWER at the source to the

luminaire.

LPL22x Series

T-Bar

LPL24x Series

Sensor enclosure

(optional)

Insert luminaire into T-bar ceiling grid. Unit should

not move freely within the ceiling grid. To ensure a

consistent appearance, align fixtures in the same

orientation throughout the ceiling pattern.

Sensor enclosure

(optional)

K.O. for EMBB only

T-Bar

CCT switch

Default lumen level is M(medium), and default CCT is

4000K. For other lumen level or CCT, loosen screw and

remove switch cover, then set switch to the desired

lumen level or CCT by screwdriver. Re-attach cover and

tighten screw.

T-Bar

Bend the brackets on the housing to make sure

they hook to T-Bar.

Secure safety cable to connection hole as needed

to meet local seismic requirements. Safety cable

and method of attachment to the building are

provided by contractor according to local

building codes.

Installation Guide

Lumen switch

Switch cover

Screw

Connection hole

for safety cable

Bracket on the housing