Anyload EC200 운영 매뉴얼 - 페이지 10

{카테고리_이름} Anyload EC200에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload EC200 16 페이지.
Anyload EC200에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

4. zero: ZERO INDICATOR turns on when scale is in Zero position

5. tare: TARE INDICATOR turns on when this function is used

6. LoUW: turns on when sample unit weight is not heavy enough for accurate counting

7. LoWT: turns on when sample number is not enough for accurate counting

8. M+: is used when accumulating the counts data; this data is memorized by pressing this key and

can be accumulated up to 99 times.

9. S1: SCALE 1 working state

10. S2: SCALE 2 working state

11. S3: SCALE 3 working state

12. LoB: low voltage, please charge battery

13. CHG: charged state, red LED lights up when charging, when the battery is fully charged, Red

and Green LED lights flash alternately.

4.1.2 Key functions

1. SCALE/SELECT: Press this button to select available counting scale among scale 1, scale 2, and

scale 3. You can only choose to use one of them at a time.

 SCALE 1: Main counting scale, the bigger platform



 SCALE 2: Smaller counting scale offers more accuracy



 SCALE 3: Extra connection platform. When we get the sample weight from SCALE 2,

we can use this platform to count more samples.

Operation way：press< Scale/ select > key，WEIGHT line will show flashed [SCALE 1]，

press

< Scale/ select > key to select then press <Enter> key to confirm .



2. UNIT key changes the weight units between kg and lb

3. ZERO key sets display to zero or subtract the container weight. The zero range is <10% of full

capacity. ZERO LED indicator will illuminate when you active the ZERO function.

4. TARE key subtracts the weight of a container placed on the weighing platform. The tare range is

<100% full capacity. Press the TARE key to enable the Auto-Tare function, the TARE LED

indicator will illuminate when you activate the TARE function.

Operation way 1 ： turn on the scale and wait for ZERO mode then place container

press<TARE>key ，WEIGHT line will show flashed 0.0000，TARE LED indicator will light up

when you activate it.

Operation way 2：（new version function）turn on the scale and wait for ZERO mode then

place container press<TARE>key, WEIGHT line will show -X.XXX，ZERO LED indicator will

light up when you activate it.

5. PRINTER key is used to transmit data to a printer, computer, or other device.

It should be connect to PC or printer by USB or RS232.

6. ENTER key has the same function as it would on a computer keyboard.

Page 10 of 16

AL-manual-EC200-En-V2