Anyload EC200 운영 매뉴얼 - 페이지 11

{카테고리_이름} Anyload EC200에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload EC200 16 페이지.
Anyload EC200에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

7. MEM/STORE key is the SAMPLE WEIGHT MEMORY KEY. Press this key to memorize sample

weight, scale can memorize up to 16 different sample weights.

eg：if you want to store sample weigh 0.22047 （1/1000 lb）at place 7，please operate as

below:

press [MEM/STORE]，WEIGHT line will show flashed [01]，press [* ] to select storage place

7 then press ENTER to confirm.

8. MEM/READ key is the SAMPLE WEIGHT READ KEY. Press this key to recall the memorized

sample weight, if more than one sample weight is memorized continue to press this key until the

correct sample weight is selected.

Operation way: input unit weight storage place by number key then press [MEM/READ] key

to catch unit weight.

9. [M+] MEMORY KEY is used when accumulating the counting data. This data is memorized by

pressing this key and can be accumulated up to 99 times.

Operation way：place weight then press [M+]，WEIGHT line will show how many times

=XX=,UNIT WEIGHT line shows flashed [Add]，press <Enter> key to confirm it and back to

counting mode. M+ LED indicator will light up when you activate it.。press [TOTAL] key to

call out the total value of accumulation

10. MC key is used to clear out the accumulated counting data.

Operation way ： press<MC> key when the M+LED lights，WEIGHT line will show how

many times =XX =, UNIT WEIGHT line shows flashed [CLr]，press <Enter>light off.

11. SAMPLE key is used when setting the counted number of samples on the platter into the scale

memory.

12. UNIT WEIGHT is used when setting the known unit weight data into the scale during normal

operation. (1/1000kg or 1/1000lb)

13. QTY/SET key is used when wanting to switch between the pieces counting function and quantity

check weighing function.

warning setting of minimum or maximum weight .

Press [QTY/SET] key，the display will show CH=OFF, press [Enter] key to select CH=ON.

press[*] key，UNIT WEIGHT line flashed，press number key to input minimum weight.

press [*] key，TOTAL line flashed，press number key to input maximum weight.

press [QTY/SET] key to exit setting mode and back to weighing mode.

If the weight placed under minimum weight at counting mode, the scale will speak out DU

DU DU. If the weight placed exceed maximum weight, the scale will speak out DI DI DI.

14. NUMERIC (0-9) keys are used for setting numeric data for sample numbers, sample weights or

to set a limit for the HI/LO settings.

15. [*] Key is used to change the division when the scale is in SCALE 3 mode.

16. TOTAL key displays the accumulated total pieces on the scale

17. ESC key is used to exit from the current menu

18. CE key is used for cancelling the numeric setting data or cancels the previous unit weight data.

4.2 Program options

Page 11 of 16

AL-manual-EC200-En-V2