Danfoss FP975 사용자 설명서 - 페이지 5

{카테고리_이름} Danfoss FP975에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss FP975 16 페이지. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Danfoss FP975에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 사용자 지침 (2 페이지)

페이지 인쇄

The text below has been edited and approved

by the Plain English Campaign, who has issued a

Crystal Mark to be displayed with it.

What is a programmer?

... an explanation for householders.

Programmers allow you to set 'On' and 'Oﬀ ' time periods. Some

models switch the central heating and domestic hot water on

and oﬀ at the same time, while others allow the domestic hot

water and heating to come on and go oﬀ at diﬀ erent times.

Set the 'On' and 'Oﬀ ' time periods to suit your own lifestyle. On

some programmers you must also set whether you want the

heating and hot water to run continuously, run under the chosen

'On' and 'Oﬀ ' heating periods, or be permanently oﬀ .

The time on the programmer must be correct. Some types have

to be adjusted in spring and autumn at the changes between

Greenwich Mean Time and British Summer Time.

You may be able to temporarily adjust the heating programme,

for example, 'Override' , 'Advance' or 'Boost' . These are explained in

the manufacturer's instructions.

The heating will not work if the room thermostat has switched

the heating oﬀ . And, if you have a hot-water cylinder, the water

heating will not work if the cylinder thermostat detects that the

hot water has reached the correct temperature.

Danfoss Heating