Addvent AVAC9000W 설치 지침 및 사용자 설명서 - 페이지 4
{카테고리_이름} Addvent AVAC9000W에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addvent AVAC9000W 9 페이지.
페이지 인쇄AVAC9000W[15]instructions
Operation
Power Control
The power control turns the unit on and
off.
Warning Light
Condensed water may accumulate in the
unit. If the internal tank becomes full, the
Warning Light will shine and the unit will
not operate until the unit has been
drained.
Mode Control
The Mode Control has 3 settings:
• Cool • Dehumidify • Fan
The settings are adjusted with Mode
Control button. A light will indicate
which setting is currently being used.
• Cooling Mode
During the cooling mode the air is
cooled and hot air is exhausted to the
outside through the exhaust tube.
Adjust fan speed and air temperature
to suit your desired comfort level.
Note : The air exchange hoses must
vent outside the room when using
cool mode.
• Dehumidify Mode
Air is dehumidified as it passes
through the unit, without being in full
cooling mode. If room temperature is
>25 degree Celsius, fan speed can be
adjusted; otherwise fan speed is fixed
9/4/15
09:43
Page 4
Control Panel
Fan Mode
Fan Speed Control
Timer
Timer / Temp set controls
4
to "low". Note : If the unit is to be
used as a dehumidifier, do not
connect the exhaust hose let the
warm air return to the room.
Continuous drainage is then
necessary.
Air is circulated throughout the room
with no cooling.
Note: unit does not need to be vented in
Fan mode
The Fan Speed Control has 3 settings:
High, Medium, and Low.
Auto turn off :With machine in running
mode, press timer button to select
number of hours you would like the unit
to run in air conditioning mode until it
automatically shuts off.
Auto turn on : With machine in stand by
mode, press timer button to select
number of hours until you would like the
unit to automatically start running in air
conditioning mode.
• Used for adjusting the timer and
thermostat.
• The default display is room
temperature.